1. The part box forming machine can accurately and quickly provide the corresponding flow and pressure according to the actual needs in the production process of the product, so as to achieve oil supply on demand and eliminate overflow loss.
1. When the parts box is not used, it should be flatly stacked. It must be placed flat. If it is not flat, it will not be bent for half a month. It is very difficult to make it straight up.
The quality of the parts box is determined by the quality of the processing and the quality of the disassembly. The processing quality of the parts box includes the main parts and accessories. The quality of the processing will indirectly affect its overall function, life and reliability, thus controlling the parts and accessories. Processing quality control is of great significance.
Ensure that the empty storage area can store a certain number of totes, the area should be large enough to facilitate the extraction of empty boxes. At the same time, it can limit the maximum empty container inventory and meet the site management requirements.
The performance of the dredging gas of the parts box is relatively high. If the air trapped between the cavity and the parison cannot be completely or expelled as quickly as possible, the parison cannot be inflated quickly, and it cannot be in good contact with the cavity after inflation.
The choice of part box deburring process depends on the following factors: burr size, productivity, part box size and type, different quality requirements, and economic considerations. For example, for small-volume, multi-variety parts box manufacturing plants...
When the surface of the part box is machined with different surface roughness, the surface with small roughness is selected to have a small feed speed, and the surface with large roughness is selected for a larger feed speed, and the variability is good. For parts boxes with complex contours, any plane curve can be approximated by straight lines or arcs. Precision machining has circular interpolation function, which can process parts with complex contours. The use of precision machining of the parts box requires the careful use of the operator.
The material commonly used in the turnover box is made of PP material. There are indeed a lot of materials that can be used to make turnover boxes, but the comprehensiveness of PP materials and the performance of various applications should be great.
The design of the anti-theft turnover box combines the advantages and disadvantages of similar products in the current market. The cover is flat, high in strength, and the moisture-proof side and the binding port are added around the box. The surface of the turnover box is suitable for repeated tearing of the label. The anti-theft lock is provided with a disposable sealing strip or a sealing buckle, which enhances the anti-theft property and improves the efficiency of logistics distribution.
Copyright © 2019 Qingdao Ruoxian Automation Technology Co., Ltd.
Technical support by E-shine